Forum | Message

Fri, March, 11th 2022

Forum Question/Topic:

Article:

Yukon/NM v9.1 and RF Mesh Firmware v9.5 are available for upgrades!

Categorized as:

Yukon v9.1.3 and Network Manager v9.1.1 are the latest available software releases. Some of the new AMI features included in v9.1 include:
- Ability to receive GPS coordinates from the Gateway 800/801 after programmed on-site with Network Runner
- New data channels for Elster A3, Landis+Gyr S4x/S4e/FOCUS RX(e), and Itron SENTINEL
- Ability to detect meter model changes in the field and update accordingly
- Addition of new device types for FOCUS AXe  Read more...meters to differentiate them from AX meters
- Tracking of meter firmware versions (in addition to RFN version)
- General improvements around mapping, smart notifications, data collection, and the RFN-1200

Also, RF Mesh Firmware v9.5 has just recently been released for general availability after several months of early monitoring and evaluation. New features and improvements here include:
- Gateway improvements to help prevent reaching the 5,000 node limit
- Extended water node support for new meters and protocols
- FOCUS meter optical port is now available for 5 minutes after power-up for probe access without requiring use of Network Runner
- Increased the maximum number of battery nodes that can associate to a relay
- Prevention of false gateway alarms on UPS battery voltage low when a UPS is not connected
- Improved network link adaptation algorithms to optimize routing
- New data channels for Elster A3, Landis+Gyr S4x/S4e/FOCUS RX(e), and Itron SENTINEL
- Network Runner improvements including addition of RSSI signal measurements, new commands to shed LCRs longer, and ability to export on-demand readings in decimal format

Please check out the Yukon 9.1 What's New guide here and Yukon 9.1 Release Notes that will be uploaded shortly for more details on these and other changes included in the latest software and firmware releases. Show less...
48bd01f0-7286-4f61-98fc-39f8b74f28bf.pdf
AMI
Yukon
software
Meter
Yukon v9.1.3 and Network Manager v9.1.1 are the latest available software releases. Some of the new AMI features included in v9.1 include: - Ability to receive GPS coordinates from the Gateway 800/801 after programmed on-site with Network Runner - New data channels for Elster A3, Landis+Gyr S4x/S4e/FOCUS RX(e), and Itron SENTINEL - Ability to detect meter model changes in the field and update accordingly - Addition of new device types for FOCUS AXe meters to differentiate them from AX meters - Tracking of meter firmware versions (in addition to RFN version) - General improvements around mapping, smart notifications, data collection, and the RFN-1200 Also, RF Mesh Firmware v9.5 has just recently been released for general availability after several months of early monitoring and evaluation. New features and improvements here include: - Gateway improvements to help prevent reaching the 5,000 node limit - Extended water node support for new meters and protocols - FOCUS meter optical port is now available for 5 minutes after power-up for probe access without requiring use of Network Runner - Increased the maximum number of battery nodes that can associate to a relay - Prevention of false gateway alarms on UPS battery voltage low when a UPS is not connected - Improved network link adaptation algorithms to optimize routing - New data channels for Elster A3, Landis+Gyr S4x/S4e/FOCUS RX(e), and Itron SENTINEL - Network Runner improvements including addition of RSSI signal measurements, new commands to shed LCRs longer, and ability to export on-demand readings in decimal format Please check out the "Yukon 9.1 What's New" guide here and "Yukon 9.1 Release Notes" that will be uploaded shortly for more details on these and other changes included in the latest software and firmware releases.
Delivered Read
Brad Lingen likes this.

Online